Sell Your Surplus Telecom Equipment Quickly and Securely.

Looking for This Equipment?

Submit your inquiry today and get the latest pricing, availability, and expert assistance tailored to your requirements.

Juniper MPC10E-10C-X

The Juniper MPC10E-10C-X is an MPC10E-10C fixed-configuration Modular Port Concentrator for Juniper MX Series routers. Juniper sells this hardware as the MPC10E-10C-MRATE and in the MPC10E-10C-P-BASE bundle with perpetual Junos software. Specifically, it delivers up to 1.0 Tbps of line-rate throughput from a single slot. As a result, it roughly doubles the per-slot capacity of earlier MPC7E cards.

8x QSFP28 and 2x QSFP56-DD Multi-Rate Ports

In addition, the card provides ten multi-rate ports: eight QSFP28 ports and two QSFP56-DD ports. All ten run at 10G, 40G, or 100G, and the QSFP56-DD cages are built for 400GbE, with speed support depending on the Junos release. Consequently, operators can deploy 100G today and move toward 400G on the same hardware.

Penta Silicon, MACsec, and DDoS Protection

Furthermore, two Packet Forwarding Engines built on Juniper’s Penta silicon power the card. Each one handles roughly half of the card’s capacity. Moreover, the MPC10E adds built-in MACsec encryption and hardware-based DDoS protection, which help secure high-capacity edge links.

Compatibility and Requirements

The MPC10E-10C works in MX240, MX480, and MX960 routers and requires Junos OS 19.2R1 or later. Full 1.0 Tbps throughput needs the enhanced midplane; with the standard midplane, the card runs at lower capacity unless operators adjust the fabric redundancy mode. Before ordering, check slot and control board requirements in Juniper’s MPC10E-10C hardware compatibility page.

MPC10E vs. MPC7E

By comparison, the Juniper MPC7E-MRATE delivers up to 480 Gbps with twelve QSFP+/QSFP28 ports. Choose the MPC10E for 100G-dense or 400G-ready slots, and the MPC7E for lower-cost 10G/40G/100G mixes.

Key Features

  • First, it provides 8x QSFP28 and 2x QSFP56-DD multi-rate ports.
  • Second, it delivers up to 1.0 Tbps per slot with the enhanced midplane.
  • Additionally, all ports run at 10G, 40G, or 100G.
  • Furthermore, the QSFP56-DD ports are built for 400GbE.
  • Moreover, it includes MACsec and hardware DDoS protection.
  • Finally, it fits MX240, MX480, and MX960 routers.

Why Lease from Telecom Leasing?

  • First, you add terabit-class MX capacity without a large capital outlay.
  • Second, we test every unit so it’s ready to deploy.
  • In addition, flexible terms cover spares, upgrades, and project builds.
  • Finally, you get fast quotes and quick shipping.

Best of all, Telecom Leasing offers the MPC10E-10C-X for lease or purchase, so you can scale MX capacity at a fraction of new cost.

Frequently Asked Questions

What is the Juniper MPC10E-10C-X?

In short, it’s an MPC10E-10C line card for MX Series routers with 8x QSFP28 and 2x QSFP56-DD ports and up to 1.0 Tbps of throughput.

Is this the same as the MPC10E-10C-MRATE?

Yes. MPC10E-10C-MRATE is Juniper’s hardware ordering code, and MPC10E-10C-P-BASE bundles the same card with perpetual Junos software.

Does it need the enhanced midplane?

Full 1.0 Tbps throughput requires the enhanced midplane. On the standard midplane, the card still works but at lower capacity.

SKU MPC10E-10C-X Category: Brand:

Our team will contact you within 24 hours.

No products in list